Application and warranty

Prepare the surface

• Completely remove mold and algae from the surface prior to application.
• Do not apply on painted, polished, or previously finished surfaces; the surface must have open pores for proper adhesion of Reveplast.
• Protect window frames, doors, and elements near the work area before starting the application.
• Verify that the surface is clean and dry before applying Sellador Plus A720.

Review the conditions

• Do not apply if rain is expected.
• Do not apply at an ambient temperature below 20 °C or above 40 °C.
• Do not apply when the relative humidity exceeds 80 %.

Application and drying

• The product is ready to use; do not mix or dilute. Only stir.
• Apply in full sections to avoid joints or seams; on large surfaces, work with two or more people to complete each section in a single operation.
• Strictly adhere to the indicated drying time.

Storage

Store tightly closed, in a dry place protected from sunlight.